Kit Option
Rough Country 6 Inch Lift Kit | Toyota Tundra 2WD/4WD (2016-2021)
You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
Fitment Notes
- Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
- Cutting and drilling is required.
- Does NOT fit Pro Series models.
- On TRD models equipped with a red rear sway bar it must be removed for installation.
- Does NOT fit XSP-X models.
- Requires 18-inch or larger wheels.
- Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
- In some cases minor trimming may be needed to clear 35-inch tires.
- On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
What's In The Box
Front:
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Steering stops
- Brake line brackets
- Differential drop brackets
- Bumpstop brackets
- Sway-bar brackets
- Lower skid plate
- Hardware
Rear:
- Fabricated lift blocks
- U-bolts
- Brake line brackets
- Hardware
Shocks:
- (2) Premium N3 Series (Rear)
Specifications
- Est. Install Time: 8-10 hours
Fitment Notes
- Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
- Cutting and drilling is required.
- Does NOT fit Pro Series models.
- On TRD models equipped with a red rear sway bar it must be removed for installation.
- Does NOT fit XSP-X models.
- Requires 18-inch or larger wheels.
- Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
- In some cases minor trimming may be needed to clear 35-inch tires.
- On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
What's In The Box
Front:
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Steering stops
- Brake line brackets
- Differential drop brackets
- Bumpstop brackets
- Sway-bar brackets
- Lower skid plate
- Hardware
Rear:
- Fabricated lift blocks
- U-bolts
- Brake line brackets
- Hardware
Shocks:
- (2) Premium N3 Series (Rear)
Specifications
- Est. Install Time: 8-10 hours
You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
Fitment Notes
- Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
- Cutting and drilling is required.
- Does NOT fit Pro Series models.
- On TRD models equipped with a red rear sway bar it must be removed for installation.
- Does NOT fit XSP-X models.
- Requires 18-inch or larger wheels.
- Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
- In some cases minor trimming may be needed to clear 35-inch tires.
- On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
What's In The Box
Front:
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Steering stops
- Brake line brackets
- Differential drop brackets
- Bumpstop brackets
- Sway-bar brackets
- Lower skid plate
- Hardware
Rear:
- Fabricated lift blocks
- U-bolts
- Brake line brackets
- Hardware
Shocks:
- (2) Premium N3 Series (Rear)
Specifications
- Est. Install Time: 8-10 hours
Fitment Notes
- Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
- Cutting and drilling is required.
- Does NOT fit Pro Series models.
- On TRD models equipped with a red rear sway bar it must be removed for installation.
- Does NOT fit XSP-X models.
- Requires 18-inch or larger wheels.
- Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
- In some cases minor trimming may be needed to clear 35-inch tires.
- On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
What's In The Box
Front:
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Steering stops
- Brake line brackets
- Differential drop brackets
- Bumpstop brackets
- Sway-bar brackets
- Lower skid plate
- Hardware
Rear:
- Fabricated lift blocks
- U-bolts
- Brake line brackets
- Hardware
Shocks:
- (2) Premium N3 Series (Rear)
Specifications
- Est. Install Time: 8-10 hours
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.
