Title
Rough Country 2.5-3 Inch Leveling Kit | Toyota Tundra 2WD/4WD (2007-2021)
Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.
Fitment Notes
- Does NOT fit Pro Series models.
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models.
What's In The Box
Front:
- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware
Specifications
- Est. Install Time: 2-3 hours
Fitment Notes
- Does NOT fit Pro Series models.
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models.
What's In The Box
Front:
- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware
Specifications
- Est. Install Time: 2-3 hours
Rough Country's 2.5" - 3" Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.
Fitment Notes
- Does NOT fit Pro Series models.
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models.
What's In The Box
Front:
- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware
Specifications
- Est. Install Time: 2-3 hours
Fitment Notes
- Does NOT fit Pro Series models.
- Does NOT fit XSP-X models.
- Strut spacer kit shims may not be required for TRD models.
What's In The Box
Front:
- Upper strut extensions
- Differential mounting spacers
- Skid plate spacers
- Bump Stops
- Hardware
Specifications
- Est. Install Time: 2-3 hours
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.
