Kit Option
Rough Country 4 Inch Lift Kit 4-Door | Jeep Wrangler JK 2WD/4WD (2007-2018)
Total transformation for your Jeep starts with Rough Country's 4-Inch Suspension Lift Kit. This all-inclusive upgrade delivers aggressive styling, enhanced ground clearance, and the rugged performance you need to conquer any trail with confidence.
Engineered for Superior Suspension Geometry
Lifted coil springs pair with coil correction plates that adjust the rear coil spring angle by 10 degrees. This design improves suspension efficiency, reduces component wear, and optimizes vibration dampening across rough terrain.
Custom Shock Options
Tailor your ride with nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks. Whether you want balanced on-road comfort or elite off-road control, this kit lets you fine-tune performance to your driving style.
Clears Up to 35-Inch Tires
Gain the clearance to run up to 35-inch tires, giving your Jeep a commanding stance and greater off-road capability.
Backed by Rough Country's Limited Lifetime Warranty
Drive with confidence knowing your investment is protected with Rough Country's limited lifetime replacement warranty.
Fitment Notes
- Does NOT fit 2-door models.
- 2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.
- If using stock wheels 1.5in wheel spacers are required.
- On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
What's In The Box
Front:
- Lifted Coil Springs
- Track Bar Drop Bracket
- Pitman Arm
- Brake Line Relocation Brackets
- Shock Relocation Brackets
- Cam Bolts
- Hardware
Rear:
- Lifted Coil Springs
- Extended Sway-Bar Links
- Coil Correction Plates
- Track Bar Drop Bracket
- Brake Line Relocation Brackets
- Hardware
Shocks:
- (4) Premium N3 Shock Absorbers
Specifications
- Est. Install Time: 4-6 hours
Product Video
Fitment Notes
- Does NOT fit 2-door models.
- 2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.
- If using stock wheels 1.5in wheel spacers are required.
- On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
What's In The Box
Front:
- Lifted Coil Springs
- Track Bar Drop Bracket
- Pitman Arm
- Brake Line Relocation Brackets
- Shock Relocation Brackets
- Cam Bolts
- Hardware
Rear:
- Lifted Coil Springs
- Extended Sway-Bar Links
- Coil Correction Plates
- Track Bar Drop Bracket
- Brake Line Relocation Brackets
- Hardware
Shocks:
- (4) Premium N3 Shock Absorbers
Specifications
- Est. Install Time: 4-6 hours
Product Video
Total transformation for your Jeep starts with Rough Country's 4-Inch Suspension Lift Kit. This all-inclusive upgrade delivers aggressive styling, enhanced ground clearance, and the rugged performance you need to conquer any trail with confidence.
Engineered for Superior Suspension Geometry
Lifted coil springs pair with coil correction plates that adjust the rear coil spring angle by 10 degrees. This design improves suspension efficiency, reduces component wear, and optimizes vibration dampening across rough terrain.
Custom Shock Options
Tailor your ride with nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks. Whether you want balanced on-road comfort or elite off-road control, this kit lets you fine-tune performance to your driving style.
Clears Up to 35-Inch Tires
Gain the clearance to run up to 35-inch tires, giving your Jeep a commanding stance and greater off-road capability.
Backed by Rough Country's Limited Lifetime Warranty
Drive with confidence knowing your investment is protected with Rough Country's limited lifetime replacement warranty.
Fitment Notes
- Does NOT fit 2-door models.
- 2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.
- If using stock wheels 1.5in wheel spacers are required.
- On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
What's In The Box
Front:
- Lifted Coil Springs
- Track Bar Drop Bracket
- Pitman Arm
- Brake Line Relocation Brackets
- Shock Relocation Brackets
- Cam Bolts
- Hardware
Rear:
- Lifted Coil Springs
- Extended Sway-Bar Links
- Coil Correction Plates
- Track Bar Drop Bracket
- Brake Line Relocation Brackets
- Hardware
Shocks:
- (4) Premium N3 Shock Absorbers
Specifications
- Est. Install Time: 4-6 hours
Product Video
Fitment Notes
- Does NOT fit 2-door models.
- 2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.
- If using stock wheels 1.5in wheel spacers are required.
- On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
What's In The Box
Front:
- Lifted Coil Springs
- Track Bar Drop Bracket
- Pitman Arm
- Brake Line Relocation Brackets
- Shock Relocation Brackets
- Cam Bolts
- Hardware
Rear:
- Lifted Coil Springs
- Extended Sway-Bar Links
- Coil Correction Plates
- Track Bar Drop Bracket
- Brake Line Relocation Brackets
- Hardware
Shocks:
- (4) Premium N3 Shock Absorbers
Specifications
- Est. Install Time: 4-6 hours
Product Video
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.
