Reduce Engine Bay Temps by Ceramic Coating Manifolds?
Add Turbo Install Kit w/ Upgraded Coolant Lines (recommended)
Full-Race 2017-2020 Ford F-150 & Raptor 3.5L EcoBoost Formline® Turbo Manifolds
MAKE MORE POWER. AVOID COSTLY REPAIRS.
If you own a 2017-2020 F-150 or Raptor 3.5L, the clock is ticking on your exhaust manifolds. The OEM logs are a documented failure point on the GEN2 3.5L EcoBoost: repeated heat cycles warp the thin flanges, the castings crack, and you end up with exhaust leaks, lost boost, and expensive repairs.
But strength is only half the problem – the factory logs were designed to be compact, not to flow. They cram all of your exhaust through one tight passage before it ever reaches the turbo, then squeeze it through an outlet that's a full 8mm smaller than the turbo inlet it feeds. That restriction turns into backpressure, backpressure turns into heat, and heat is where power gets lost.
The Formline® Turbo Manifolds solve GEN2 3.5L manifold concerns once and for all.
Investment-cast from 347 stainless steel with thicker 1/2" flanges and A286 studs, Formline® manifolds hold their own through countless heat cycles, resisting the warping, cracking, and exhaust leaks that plague the OEM logs, even under heavy boost.
And they let your EcoBoost finally breathe. Each cylinder gets its own precisely shaped runner, starting at the exhaust port area and tapering gradually along a dedicated path to the merge collector, so exhaust pulses stop fighting each other. The outlets are opened to 41mm to port-match the GEN2 turbine housing, eliminating the pre-turbo restriction entirely. Less backpressure means better turbine efficiency, faster and more predictable spool, and an engine that finally breathes the way the turbos want it to.
Whether you’re chasing more power, better longevity, or just peace of mind before your next long haul, the Formline® Manifolds give your EcoBoost a stronger foundation to build on and the confidence to keep pushing it.
Application List
-
2017-2020 Ford F-150 3.5L EcoBoost
-
2017-2020 Ford Raptor 3.5L EcoBoost
-
2018-2021 Ford Expedition 3.5L EcoBoost
-
2018-2021 Lincoln Navigator 3.5L EcoBoost
Features & Benefits
- Dyno-Proven Gains (up to +97 WHP): Improved flow directly translates to more horsepower, faster spool, and smoother throttle response. On our GEN2 test truck, swapping only the manifolds added up to +97 WHP at the peak and +90 WTQ through the midrange, with no loss of spool.
- 41mm Port-Matched Outlets: The OEM log's 33mm outlet dumps into a 41mm turbine inlet, forcing exhaust through a sharp 90° step, the most restrictive way to join two ducts. Formline® outlets are opened to 41mm to match the GEN2 turbine housing, roughly a 54% increase in outlet area, removing the pre-turbo restriction.
- Individual Runner + Merge Collector Design: Each cylinder gets its own runner feeding a merge collector, keeping exhaust pulses from interfering with each other even at high power levels. The OEM log crams two cylinders' worth of exhaust through a slot with a hydraulic diameter of just 31.4mm, narrower than the runner we would use for a single cylinder on a 1.6L turbo manifold.
- 347 Stainless Steel Construction: Investment-cast 347 stainless steel handles up to 1740°F (950°C) for superior resistance to heat, cracking, and corrosion, even under sustained high-boost conditions.
- Thicker 1/2" Flanges: The OEM flanges are 3/8" thick and warp under repeated heat cycles, which is where the leaks start. Formline® flanges are a full 1/2" thick, keeping the sealing surface flat for the life of the truck.
- A286 Formline® Hardware Kit Included: Every set ships with our A286 iron-nickel superalloy exhaust manifold studs and nuts, designed to resist fatigue, corrosion, and thermal expansion far beyond OEM hardware.
- Compatible with OEM & Upgrade Turbos: Unlike the OEM logs (and most aftermarket manifolds), the Formline® design was engineered to seamlessly fit both OEM and larger turbochargers, offering better compatibility and enhanced flow for upgraded setups.
- 100% Bolt-On Replacement: Direct fit using factory mounting points. No cutting, no fabrication, no guesswork.
- 50-State Legal, CARB EO D-898: These manifolds carry California Air Resources Board Executive Order D-898, which exempts them from California's anti-tampering law for the 2017-2020 F-150 and Raptor, making them street legal in all 50 states.
- Limited Lifetime Warranty: Built to last and backed by Full-Race’s limited lifetime warranty against manufacturing defects.
- Optional Turbo Install Kit (Recommended): Add the GEN2 Twin Turbo Install Kit with upgraded AN coolant lines and skip sourcing gaskets, hardware, and lines yourself. The factory coolant lines are another known GEN2 weak point, so if you are already in there, replacing them is cheap insurance.
Real Results
We didn't want to guess how much power the OEM logs left on the table, so we measured. We strapped our GEN2 3.5L test truck to the dyno and ran it back-to-back: OEM log manifolds first, then the Formline® Manifolds, with nothing else changed between runs.
The test truck: Full-Race’s 2018 GEN2 3.5L EcoBoost, running our Formline® Complete Power Pack, an MPT 91-octane tune, and SPD catted downpipes and exhaust. Stock long block, stock fuel system, capped at a safe 20 PSI on Arizona 91-octane in 102-105°F summer heat.


The results: Our best cooled-down pull peaked at 558 WHP, a +97 WHP gain over the OEM logs with no loss of spool, and at matched temperature the manifolds alone added +90 WTQ in the midrange where a truck lives.
Read the full write-up: Formline Manifolds vs OEM Log Style: Back-to-Back Dyno Test
Watch the video:
Formline® vs OEM
| Specification | Formline®Turbo Manifolds | OEMLog Manifolds | Improvement / Notes |
|---|---|---|---|
| Outlet Diameter | 41 mmPort-matched | 33 mm | Opened to match the 41mm OEM turbine inlet, roughly a 54% larger outlet area, removing the sharp 90° step before the turbo that creates backpressure. |
| Flange Thickness | 1/2" | 3/8" | Thicker, flatter sealing surface resists warping and exhaust leaks under repeated heat cycles. |
| Runner Design | Individual runner + merge collector | Slot-shaped log31.4 mm hydraulic diameter, shared by two cylinders | Dedicated runners give each cylinder its own path instead of forcing two cylinders through one narrow OEM passage, reducing backpressure and improving turbine efficiency. |
| Hardware | A286 iron-nickel superalloy | OEM mild steel | A286 iron-nickel superalloy studs help prevent the common 3.5L exhaust leaks; the kit also includes new nuts and gaskets. |
| Turbo Fitment | Designed to fit larger turbos + OEM turbos | Limited | Formline® clears larger turbos, unlike the OEM log and many aftermarket manifolds. |
Swipe to see the full comparison
FAQ
Why are Formline® Turbo Manifolds better than the OEM log manifolds?
How much power will I actually gain?
Do I need a tune to run these?
Are these compatible with stock and upgraded turbos?
Are the Formline® manifolds street legal / emissions compliant?
What makes 347 stainless steel better than 304 stainless or OEM materials?
Will I need to modify anything to install them?
Is hardware included?
Should I add the Turbo Install Kit?
What vehicles do these fit?
- 2017-2020 Ford F-150
- 2017-2020 Ford Raptor
- 2018-2021 Ford Expedition
- 2018-2021 Lincoln Navigator
We also offer:
- GEN1 (2011-2016) – Formline® Turbo Manifolds for 3.5L EcoBoost F-150
- GEN3 (2021+) – Formline® Turbo Manifolds for 3.5L EcoBoost F-150 & Raptor
Will this affect my vehicle's warranty?
Do the Formline® manifolds come with a warranty?
What does the ceramic coating option do?
Specifications / Resources
-
Material: 347 Stainless Steel
-
Color: Raw Stainless (Ceramic Coating available)
-
CARB Executive Order: D-898
-
Kit Includes:
-
(x2) Formline® Exhaust Manifolds
-
(x2) Exhaust Manifold Gaskets
-
(x1) Complete Formline® A286 Hardware Kit with 16 studs and nuts
-
-
Fitment:
-
2017-2020 Ford F-150 3.5L EcoBoost
-
2017-2020 Ford Raptor 3.5L EcoBoost
-
2018-2021 Ford Expedition 3.5L EcoBoost
-
2018-2021 Lincoln Navigator 3.5L EcoBoost
-
Replaces OEM part numbers
| Vehicle | Driver side (LH) | Passenger side (RH) |
|---|---|---|
| 2017-2020 Ford F-150 3.5L EcoBoost | JL3Z-9431-CJL3Z-9431-A | JL3Z-9430-CJL3Z-9430-A |
| 2018-2021 Ford Expedition 3.5L EcoBoost | JL3Z-9431-CJL3Z-9431-A | JL3Z-9430-CJL3Z-9430-A |
| 2017-2020 Ford F-150 Raptor 3.5L EcoBoost | JL7Z-9431-CJL7Z-9431-B | JL7Z-9430-BJL7Z-9430-A |
| 2018-2021 Lincoln Navigator 3.5L EcoBoost | JL7Z-9431-CJL7Z-9431-B | JL7Z-9430-BJL7Z-9430-A |
Current Ford part number listed first; earlier superseded number below it.
UNLEASH YOUR PERFORMANCE POTENTIAL
Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.
Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.
Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports


MAKE MORE POWER. AVOID COSTLY REPAIRS.
If you own a 2017-2020 F-150 or Raptor 3.5L, the clock is ticking on your exhaust manifolds. The OEM logs are a documented failure point on the GEN2 3.5L EcoBoost: repeated heat cycles warp the thin flanges, the castings crack, and you end up with exhaust leaks, lost boost, and expensive repairs.
But strength is only half the problem – the factory logs were designed to be compact, not to flow. They cram all of your exhaust through one tight passage before it ever reaches the turbo, then squeeze it through an outlet that's a full 8mm smaller than the turbo inlet it feeds. That restriction turns into backpressure, backpressure turns into heat, and heat is where power gets lost.
The Formline® Turbo Manifolds solve GEN2 3.5L manifold concerns once and for all.
Investment-cast from 347 stainless steel with thicker 1/2" flanges and A286 studs, Formline® manifolds hold their own through countless heat cycles, resisting the warping, cracking, and exhaust leaks that plague the OEM logs, even under heavy boost.
And they let your EcoBoost finally breathe. Each cylinder gets its own precisely shaped runner, starting at the exhaust port area and tapering gradually along a dedicated path to the merge collector, so exhaust pulses stop fighting each other. The outlets are opened to 41mm to port-match the GEN2 turbine housing, eliminating the pre-turbo restriction entirely. Less backpressure means better turbine efficiency, faster and more predictable spool, and an engine that finally breathes the way the turbos want it to.
Whether you’re chasing more power, better longevity, or just peace of mind before your next long haul, the Formline® Manifolds give your EcoBoost a stronger foundation to build on and the confidence to keep pushing it.
Application List
-
2017-2020 Ford F-150 3.5L EcoBoost
-
2017-2020 Ford Raptor 3.5L EcoBoost
-
2018-2021 Ford Expedition 3.5L EcoBoost
-
2018-2021 Lincoln Navigator 3.5L EcoBoost
Features & Benefits
- Dyno-Proven Gains (up to +97 WHP): Improved flow directly translates to more horsepower, faster spool, and smoother throttle response. On our GEN2 test truck, swapping only the manifolds added up to +97 WHP at the peak and +90 WTQ through the midrange, with no loss of spool.
- 41mm Port-Matched Outlets: The OEM log's 33mm outlet dumps into a 41mm turbine inlet, forcing exhaust through a sharp 90° step, the most restrictive way to join two ducts. Formline® outlets are opened to 41mm to match the GEN2 turbine housing, roughly a 54% increase in outlet area, removing the pre-turbo restriction.
- Individual Runner + Merge Collector Design: Each cylinder gets its own runner feeding a merge collector, keeping exhaust pulses from interfering with each other even at high power levels. The OEM log crams two cylinders' worth of exhaust through a slot with a hydraulic diameter of just 31.4mm, narrower than the runner we would use for a single cylinder on a 1.6L turbo manifold.
- 347 Stainless Steel Construction: Investment-cast 347 stainless steel handles up to 1740°F (950°C) for superior resistance to heat, cracking, and corrosion, even under sustained high-boost conditions.
- Thicker 1/2" Flanges: The OEM flanges are 3/8" thick and warp under repeated heat cycles, which is where the leaks start. Formline® flanges are a full 1/2" thick, keeping the sealing surface flat for the life of the truck.
- A286 Formline® Hardware Kit Included: Every set ships with our A286 iron-nickel superalloy exhaust manifold studs and nuts, designed to resist fatigue, corrosion, and thermal expansion far beyond OEM hardware.
- Compatible with OEM & Upgrade Turbos: Unlike the OEM logs (and most aftermarket manifolds), the Formline® design was engineered to seamlessly fit both OEM and larger turbochargers, offering better compatibility and enhanced flow for upgraded setups.
- 100% Bolt-On Replacement: Direct fit using factory mounting points. No cutting, no fabrication, no guesswork.
- 50-State Legal, CARB EO D-898: These manifolds carry California Air Resources Board Executive Order D-898, which exempts them from California's anti-tampering law for the 2017-2020 F-150 and Raptor, making them street legal in all 50 states.
- Limited Lifetime Warranty: Built to last and backed by Full-Race’s limited lifetime warranty against manufacturing defects.
- Optional Turbo Install Kit (Recommended): Add the GEN2 Twin Turbo Install Kit with upgraded AN coolant lines and skip sourcing gaskets, hardware, and lines yourself. The factory coolant lines are another known GEN2 weak point, so if you are already in there, replacing them is cheap insurance.
Real Results
We didn't want to guess how much power the OEM logs left on the table, so we measured. We strapped our GEN2 3.5L test truck to the dyno and ran it back-to-back: OEM log manifolds first, then the Formline® Manifolds, with nothing else changed between runs.
The test truck: Full-Race’s 2018 GEN2 3.5L EcoBoost, running our Formline® Complete Power Pack, an MPT 91-octane tune, and SPD catted downpipes and exhaust. Stock long block, stock fuel system, capped at a safe 20 PSI on Arizona 91-octane in 102-105°F summer heat.


The results: Our best cooled-down pull peaked at 558 WHP, a +97 WHP gain over the OEM logs with no loss of spool, and at matched temperature the manifolds alone added +90 WTQ in the midrange where a truck lives.
Read the full write-up: Formline Manifolds vs OEM Log Style: Back-to-Back Dyno Test
Watch the video:
Formline® vs OEM
| Specification | Formline®Turbo Manifolds | OEMLog Manifolds | Improvement / Notes |
|---|---|---|---|
| Outlet Diameter | 41 mmPort-matched | 33 mm | Opened to match the 41mm OEM turbine inlet, roughly a 54% larger outlet area, removing the sharp 90° step before the turbo that creates backpressure. |
| Flange Thickness | 1/2" | 3/8" | Thicker, flatter sealing surface resists warping and exhaust leaks under repeated heat cycles. |
| Runner Design | Individual runner + merge collector | Slot-shaped log31.4 mm hydraulic diameter, shared by two cylinders | Dedicated runners give each cylinder its own path instead of forcing two cylinders through one narrow OEM passage, reducing backpressure and improving turbine efficiency. |
| Hardware | A286 iron-nickel superalloy | OEM mild steel | A286 iron-nickel superalloy studs help prevent the common 3.5L exhaust leaks; the kit also includes new nuts and gaskets. |
| Turbo Fitment | Designed to fit larger turbos + OEM turbos | Limited | Formline® clears larger turbos, unlike the OEM log and many aftermarket manifolds. |
Swipe to see the full comparison
FAQ
Why are Formline® Turbo Manifolds better than the OEM log manifolds?
How much power will I actually gain?
Do I need a tune to run these?
Are these compatible with stock and upgraded turbos?
Are the Formline® manifolds street legal / emissions compliant?
What makes 347 stainless steel better than 304 stainless or OEM materials?
Will I need to modify anything to install them?
Is hardware included?
Should I add the Turbo Install Kit?
What vehicles do these fit?
- 2017-2020 Ford F-150
- 2017-2020 Ford Raptor
- 2018-2021 Ford Expedition
- 2018-2021 Lincoln Navigator
We also offer:
- GEN1 (2011-2016) – Formline® Turbo Manifolds for 3.5L EcoBoost F-150
- GEN3 (2021+) – Formline® Turbo Manifolds for 3.5L EcoBoost F-150 & Raptor
Will this affect my vehicle's warranty?
Do the Formline® manifolds come with a warranty?
What does the ceramic coating option do?
Specifications / Resources
-
Material: 347 Stainless Steel
-
Color: Raw Stainless (Ceramic Coating available)
-
CARB Executive Order: D-898
-
Kit Includes:
-
(x2) Formline® Exhaust Manifolds
-
(x2) Exhaust Manifold Gaskets
-
(x1) Complete Formline® A286 Hardware Kit with 16 studs and nuts
-
-
Fitment:
-
2017-2020 Ford F-150 3.5L EcoBoost
-
2017-2020 Ford Raptor 3.5L EcoBoost
-
2018-2021 Ford Expedition 3.5L EcoBoost
-
2018-2021 Lincoln Navigator 3.5L EcoBoost
-
Replaces OEM part numbers
| Vehicle | Driver side (LH) | Passenger side (RH) |
|---|---|---|
| 2017-2020 Ford F-150 3.5L EcoBoost | JL3Z-9431-CJL3Z-9431-A | JL3Z-9430-CJL3Z-9430-A |
| 2018-2021 Ford Expedition 3.5L EcoBoost | JL3Z-9431-CJL3Z-9431-A | JL3Z-9430-CJL3Z-9430-A |
| 2017-2020 Ford F-150 Raptor 3.5L EcoBoost | JL7Z-9431-CJL7Z-9431-B | JL7Z-9430-BJL7Z-9430-A |
| 2018-2021 Lincoln Navigator 3.5L EcoBoost | JL7Z-9431-CJL7Z-9431-B | JL7Z-9430-BJL7Z-9430-A |
Current Ford part number listed first; earlier superseded number below it.
UNLEASH YOUR PERFORMANCE POTENTIAL
Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.
Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.
Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports


By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.