Title
Rough Country 3 Inch Lift Kit Coilover Conversion | Diesel | Ford F-250 Super Duty (17-22)
Explore New Heights. Give your fourth-generation Ford Super Duty superior lift height with Rough Country's 3-inch Coilover Suspension Lift Kit! This all-inclusive kit comes with everything you need for a total transformation of your truck. Run up to 35in tires while preserving the smooth, factory ride quality with this impressive upgrade. Durable Components. When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 3-inch Suspension Lift features a set of ultra-durable radius arm drop brackets, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. Utilizing this conversion kit you're removing the factory independent coil shock and coil set-up and replacing it with a massive 2.5in piston, nitrogen-charged, Vertex Coilover. Rough Country’s Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. When it comes to investing in a high-end kit, you’ll be pleased to find that Rough Country’s 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock. Each kit is paired with a monotube shock that provides optimal damping control. Installation. Requiring cutting and drilling to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty. Rough Country's 3-inch Coilover Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Fitment Notes
- Does NOT F-350 models.
- Does NOT fit gas engine models.
- Does NOT fit dually models.
- A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197.
- Does NOT work on models equipped with Tremor Package.
- If equipped with factory top mount overload spring it will need to be removed.
What's In The Box
Front:
- Vertex Coilovers
- Radius Arm Drop Brackets
- Track bar drop bracket
- Hardware
- Hardware
Rear:
- 2" Lift Blocks
- U-bolts
- Hardware
Shocks:
- (2) Rear V2 Monotube Shocks
Specifications
- Est. Install Time: 5 - 6 hours
Product Video
Fitment Notes
- Does NOT F-350 models.
- Does NOT fit gas engine models.
- Does NOT fit dually models.
- A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197.
- Does NOT work on models equipped with Tremor Package.
- If equipped with factory top mount overload spring it will need to be removed.
What's In The Box
Front:
- Vertex Coilovers
- Radius Arm Drop Brackets
- Track bar drop bracket
- Hardware
- Hardware
Rear:
- 2" Lift Blocks
- U-bolts
- Hardware
Shocks:
- (2) Rear V2 Monotube Shocks
Specifications
- Est. Install Time: 5 - 6 hours
Product Video
Explore New Heights. Give your fourth-generation Ford Super Duty superior lift height with Rough Country's 3-inch Coilover Suspension Lift Kit! This all-inclusive kit comes with everything you need for a total transformation of your truck. Run up to 35in tires while preserving the smooth, factory ride quality with this impressive upgrade. Durable Components. When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 3-inch Suspension Lift features a set of ultra-durable radius arm drop brackets, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. Utilizing this conversion kit you're removing the factory independent coil shock and coil set-up and replacing it with a massive 2.5in piston, nitrogen-charged, Vertex Coilover. Rough Country’s Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. When it comes to investing in a high-end kit, you’ll be pleased to find that Rough Country’s 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock. Each kit is paired with a monotube shock that provides optimal damping control. Installation. Requiring cutting and drilling to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty. Rough Country's 3-inch Coilover Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Fitment Notes
- Does NOT F-350 models.
- Does NOT fit gas engine models.
- Does NOT fit dually models.
- A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197.
- Does NOT work on models equipped with Tremor Package.
- If equipped with factory top mount overload spring it will need to be removed.
What's In The Box
Front:
- Vertex Coilovers
- Radius Arm Drop Brackets
- Track bar drop bracket
- Hardware
- Hardware
Rear:
- 2" Lift Blocks
- U-bolts
- Hardware
Shocks:
- (2) Rear V2 Monotube Shocks
Specifications
- Est. Install Time: 5 - 6 hours
Product Video
Fitment Notes
- Does NOT F-350 models.
- Does NOT fit gas engine models.
- Does NOT fit dually models.
- A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197.
- Does NOT work on models equipped with Tremor Package.
- If equipped with factory top mount overload spring it will need to be removed.
What's In The Box
Front:
- Vertex Coilovers
- Radius Arm Drop Brackets
- Track bar drop bracket
- Hardware
- Hardware
Rear:
- 2" Lift Blocks
- U-bolts
- Hardware
Shocks:
- (2) Rear V2 Monotube Shocks
Specifications
- Est. Install Time: 5 - 6 hours
Product Video
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.
