Title
ADRO PREPREG SPOILER FINAL EDITION BMW F82 M4 2015-2020
The F82 deserves a proper send-off, and we're not leaving anything on the table. The Final Edition Spoiler is the second iteration of our F82 M4 spoiler, refined from the original and built to be the definitive version for this chassis.
The spoiler sits flush along the trailing edge of the trunk lid, adding a subtle but deliberate visual punctuation to the rear of the car.
Designed to fit the F82 M4 without modification to the trunk lid. Installs with 3M double sided tape. Paired with the rest of the Final Edition kit, the full setup adds +257N (58 lbs) of downforce and just +63N (14 lbs) of drag over stock, making it a functional aero package as much as a visual one.
Why Prepreg? No compromises.
Prepreg carbon fiber starts with resin pre-impregnated into the fiber at the factory, then cured under heat and pressure. The result is a precise, consistent resin-to-fiber ratio that isn't achievable with traditional wet lay methods. It's the same process used in motorsport and aerospace, and it shows in the finish, the weight, and the structural integrity of the final part.
Compatible With
- 2015 - 2020 BMW F82 M4
- 2015 - 2019 BMW F83 M4 Convertible
Specifications
- SKU: A14A10-1502
- Material: Prepreg (Dry) Carbon Fiber
What's in the box
- 1 Prepreg Spoiler
- 2 Packs of Adhesion Promoter
- 2 Rolls of Double Sided Tape
The F82 deserves a proper send-off, and we're not leaving anything on the table. The Final Edition Spoiler is the second iteration of our F82 M4 spoiler, refined from the original and built to be the definitive version for this chassis.
The spoiler sits flush along the trailing edge of the trunk lid, adding a subtle but deliberate visual punctuation to the rear of the car.
Designed to fit the F82 M4 without modification to the trunk lid. Installs with 3M double sided tape. Paired with the rest of the Final Edition kit, the full setup adds +257N (58 lbs) of downforce and just +63N (14 lbs) of drag over stock, making it a functional aero package as much as a visual one.
Why Prepreg? No compromises.
Prepreg carbon fiber starts with resin pre-impregnated into the fiber at the factory, then cured under heat and pressure. The result is a precise, consistent resin-to-fiber ratio that isn't achievable with traditional wet lay methods. It's the same process used in motorsport and aerospace, and it shows in the finish, the weight, and the structural integrity of the final part.
Compatible With
- 2015 - 2020 BMW F82 M4
- 2015 - 2019 BMW F83 M4 Convertible
Specifications
- SKU: A14A10-1502
- Material: Prepreg (Dry) Carbon Fiber
What's in the box
- 1 Prepreg Spoiler
- 2 Packs of Adhesion Promoter
- 2 Rolls of Double Sided Tape
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.
