Title
Full-Race 2011-2014 Ford F-150 3.5L EcoBoost Oil Cooler Kit
2011-2014 Ford F-150 EcoBoost Oil Cooler Kit
The old saying "Oil is the lifeblood of your engine" is as true today as ever. Modern high-performance production engines are critically dependant upon cool oil to avoid efficiency and power robbing wear. The OEM cooling system does a great job - but it can be overtaxed, especially on high performance applications, off-road racing, or towing a heavy load up steep hills. When your engine coolant gets hot, the oil subsequently overheats also. Hot oil degrades and breaks down, losing viscosity and lubricity. Using a high efficiency Setrab Air-to-Oil heat exchanger core, this kit can remove 30,000-35,000+ btu/hr from Ford Ecoboost 3.5L V6's and 5.0L V8's. Whether you tow or race off-road, we realize many truck owners use their vehicles for short trips as well as heavy hauls. So, we integrated a thermostat into the sandwhich filter housing. Similar to the thermostat in your water-cooling system, this thermostat will not open until the engine reaches full operating temp. Its equally important to not 'over-cool' the oil upon startup in winter time for cold low-load driving as it is to not overheat the oil during hot high-load driving!
Features:
- Setrab oil cooler core (fully brazed construction with black epoxy finish)
- Thermostat controlled oil filter sandwhich-adapter
- -10 smooth bore hose with 5 ply composite construction, rated to 400-degrees F, burst pressure >1000psi
- Black powdercoated mounting bracket for F150 front bumper
- Installation kit includes -AN Fittings and bolts/washers/nuts
Fitment:
- Ford F-150 3.5L V6 2011-2014
- Ford F-150 5.0L V8 2011-2014 NOTE: This requires a relocated Front-Mount Intercooler to provide the open space in the front grille.
Installation Guide
2011-2014 Ford F-150 EcoBoost Oil Cooler Kit
The old saying "Oil is the lifeblood of your engine" is as true today as ever. Modern high-performance production engines are critically dependant upon cool oil to avoid efficiency and power robbing wear. The OEM cooling system does a great job - but it can be overtaxed, especially on high performance applications, off-road racing, or towing a heavy load up steep hills. When your engine coolant gets hot, the oil subsequently overheats also. Hot oil degrades and breaks down, losing viscosity and lubricity. Using a high efficiency Setrab Air-to-Oil heat exchanger core, this kit can remove 30,000-35,000+ btu/hr from Ford Ecoboost 3.5L V6's and 5.0L V8's. Whether you tow or race off-road, we realize many truck owners use their vehicles for short trips as well as heavy hauls. So, we integrated a thermostat into the sandwhich filter housing. Similar to the thermostat in your water-cooling system, this thermostat will not open until the engine reaches full operating temp. Its equally important to not 'over-cool' the oil upon startup in winter time for cold low-load driving as it is to not overheat the oil during hot high-load driving!
Features:
- Setrab oil cooler core (fully brazed construction with black epoxy finish)
- Thermostat controlled oil filter sandwhich-adapter
- -10 smooth bore hose with 5 ply composite construction, rated to 400-degrees F, burst pressure >1000psi
- Black powdercoated mounting bracket for F150 front bumper
- Installation kit includes -AN Fittings and bolts/washers/nuts
Fitment:
- Ford F-150 3.5L V6 2011-2014
- Ford F-150 5.0L V8 2011-2014 NOTE: This requires a relocated Front-Mount Intercooler to provide the open space in the front grille.
Installation Guide
By changing our most important processes and
products, we have already made a big leap forward. This ranges from the
increased use of more sustainable fibers to the use of more
environmentally friendly printing processes to the development of
efficient waste management in our value chain.